See what our Experts say about this CE Smith Boat Trailer Parts

• Recommended Roller Bunks for 2020 18 Express Boat with Back Track Aluminum Trailer
  The best option in my opinion is to use the Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers # DL21741 which will allow you to angle the set farther up the trailer to help you center the hull but I recommend using a keel roller like the CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel/Black Rubber - 5" # CE10401G to help center the boat. The Boat Trailer Roller Bunk Bracket for Dutton-Lainson Roller Bunks Parts DL21740 &...
  view full answer...
  
• Types of Available Boat Trailer Roller Assemblies for Older Calkins Boat Trailer
  On the linked page you will be able to see all boat trailer roller parts we offer, which include both roller guide-ons like # CE27610 from CE Smith, roller bunks like # DL21741 from Dutton-Lainson and also bow and keel roller assemblies like # CE10401G. Just click on the category you're looking for and you'll then see all available products of that type. If you are not able to find what you're looking for by reviewing the linked page you can send your photos to me via reply email.
  view full answer...
• Recommended Keel Rollers to Replace Worn Rollers on Boat Trailer
  Looking at the picture you attached (thank you!), it appears that the weight of your boat might be putting too much pressure on your existing keel rollers, which has caused them to wear down to the point of them not functioning like they should. I definitely recommend replacing the existing rollers because of the visible damage, but I also recommend adding a couple more rows to your trailer to support the other two keels on the boat. This will help to better disperse its weight so you don't...
  view full answer...
  
• Replacement Roller Assembly for Deep-V Style Boat Trailer
  If you just want to replace the roller assembly you have now then the CE Smith Deep V Keel Roller Assembly part # CE10401G is what I recommend. However, if you are having trouble aligning with the roller then you might want to consider a larger roller assembly like the CE Smith Deep V Keel Roller Assembly part # CE10403G which is 8" wide. These options will both work great with your deep v style hull. In order to attach either option you can reuse the mounting hardware that you have now.
  view full answer...
  
• Roller For Use With Tourney Pro Transom Saver
  The right roller will depend on the frame of your boat trailer for use with the Tourney Pro Transom Saver # 315-FXJ. For example, you can go with the Deep V Keel Roller Assembly for Boat Trailers # CE10401G and the 3-13/16" Long x 3-1/16" Wide CE Smith U-Bolts # CE15283GA-2. If those aren't the right size U-bolts I've added a link below to our entire selection which you can filter through by size.
  view full answer...
• Distance Between Mounting Slots of CE Smith Deep V Keel Roller Assembly
  The center to center distance between the mounting slots of the CE Smith Deep V Keel Roller Assembly # CE10401G is 3 inches.
  view full answer...
  
• Keel Roller For Transom Saver On Boat Trailer
  CE Smith Deep V Keel Roller Assembly for Boat Trailers - 5" # CE10401G is an assembly that won't take up a lot of room and still allow you to attach a transom saver. You would need to provide your own hardware for mounting to your trailer. I attached a link to our Transom Savers if you need one.
  view full answer...
• Should Boat Rest on Bunk Boards or Keel Rollers on Boat Trailer
  The majority of the weight of your boat should be supported by the bunk boards or by roller bunks. When the article referenced rollers it did not mean keel rollers. Keel rollers like the # CE10401G can hold the weight of the boat when loading and unloading, and also provide great support for the keel and absorb road shock. However, they should not hold the majority of the weight of your boat on the trailer. In addition to keel rollers you will also want to use bunk boards like the # CE27840...
  view full answer...
• Compatibility of Boat Trailer with Boston Whaler Sport
  Your trailer sounds like it will work just fine based on the dimensions and weight you gave. I simply recommend putting the bunks up as high as possible for your initial loading onto the trailer because the underside of your boat from my research has a deep groove on each side where those bunks sit. Make sure the bunks are in the depth of the groove and the outside bottom of the groove is either over the fender or inside it. If you need taller supports you can adjust the height. We...
  view full answer...
  
• Keel Roller Assembly to Fit 3 Inch Wide Trailer Tongue on 2004 McClain Boat Trailer
  I have a solution for you, but since the center to center space of the mounting slots on the CE Smith Deep V Keel Roller, 5 Inches # CE10401G measures 3 inches, the roller will not mount to your 3 inch wide trailer frame. There will not be enough room to attach the roller bracket to the frame. Instead, I recommend using the CE Smith Spool Roller Assembly for Boat Trailers, 4 Inches # CE10400G. This roller's mounting slots are 2 inches apart on center, which will give you sufficient room...
  view full answer...
• Bunk Brackets and Keel Rollers for Magic Tilt Boat Trailer
  We do have bunk brackets and keel rollers that you can use with your Magic Tilt boat trailer, though not that size leaf spring. For the brackets you only need to choose the size you want: - 9 Inches: CE Smith Bolster and Swivel Bracket Assemblies # CE10000G-4 - 11 Inches: CE Smith Bolster and Swivel Bracket Assemblies # CE10001G-4 - 13 Inches: CE Smith Bolster and Swivel Bracket Assemblies # CE10002G-4 With each of these brackets you can attach them with CE Smith U-Bolts # CE15283GA-4. As...
  view full answer...
• Replacement Surge Actuator, Brake Line, V Roller, and Roller Bunks for 85 Magic Tilt Trailer
  Hey Mike, so lets start first with an actuator to replace your coupler. For that the Demco part # DM72VR would be a great option that has as easy to use latch and was designed for drum brakes and a 2 inch hitch ball. It sounds like the brake line was cut right at the back of the actuator so for a replacement for that you'd want the part # DM02032. If you needed a complete replacement brake line kit we have the part # 18SI-BLKIT that you referenced. To do new wheel cylinders on the brake...
  view full answer...
• Will CE Smith Deep V Keel Roller Assembly # CE10401G Fit In 5-Inch Opening
  I went to our warehouse and measured the CE Smith Deep V Keel Roller Assembly, part # CE10401G. The roller bracket measures 5-1/2 inches wide. The width of the roller pin with the caps on is 6-1/4 inches. This roller assembly will not fit in the 5-inch opening you said you have. I recommend you go with the 4 inch roller, part # CE10400G. The # CE10400G bracket measures 4-1/2 inches wide and is 6 inches long.
  view full answer...
  
• Distance Above Mounting Surface Center of Roller on CE Smith Roller Bracket CE10401G
  I went out and pulled a CE Smith Roller Assembly part # CE10401G and found that it has a distance of 3-5/8 inches from where it mounts to the center of the roller.
  view full answer...
• Solution for a 5 inch Bow Roller Assembly
  I have a 5 inch roller, but the largest Bow Roller Assembly that we offer is a 4 inch, like part # YR450Y-400Y. The CE Smith Deep V Keel Roller Assembly # CE10401G is 5 inches and will accomplish the same task that a bow roller will. The only difference that you will need to consider is that the shank diameter for the 4 inch bow rollers is 1/2 inch while the keel rollers use 5/8 inch diameter shafts. You can take your old assembly off and mount this assembly if the 5/8 inch diameter shaft...
  view full answer...
• Replacement Panel Brackets For A 5 Inch Boat Trailer Rollers
  I took a look at what we have, and all of our panel brackets for boat trailer rollers, like the: -CE Smith Panel Bracket for 5" Boat Trailer Rollers # CE10301G have a 1/2" wide x 5" tall slot. These particular roller brackets are designed to be used with 5" rollers, and is made from galvanized steel that are hot dipped in steel. If you are interested in the entire assembly, the CE Smith Deep V Keel Roller Assembly for Boat Trailers # CE10401G is the complete assembly for # CE10301G and...
  view full answer...
• Replacement for a 4-1/2" Long Keel Roller on a Boat Trailer
  The 4-1/2" keel roller is a size commonly found in Australia. You might consider switching to the 5" Keel Roller Assembly # CE10401G so that you will be able to find parts more easily find a replacement Roller # YR5213-5 in the future.
  view full answer...
• V Keel Roller Recommendation for a Gregor Fishing Boat
  Based on what you said you are looking for I think your best option would be the CE Smith Deep V Keel Roller Assembly # CE10401G. This is a 5 inch V keel roller that will be within 3 inches above the frame and it actually costs less than the Ce Smith CE Smith Keel Roller # CE32003G that you referenced.
  view full answer...
• Recommended Tires, Brake Assemblies, And Hubs For 2004 Venture Boat Trailer
  For your 2004 Venture Trailer, I recommend the Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" Diameter - 6 on 5-1/2 # AKHD-655-6-K. This comes with the bearings and seal you need. For your hydraulic brake assemblies, I recommend the Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 12" - Left/Right Hand - 5.2K to 7K # AKFBBRK-7-D. For your tires and wheels, I recommend the Provider ST225/75R15 Radial Trailer Tire w/ 15" White Mod Wheel - 6 on 5-1/2 - LR...
  view full answer...
• How Much Shaft is Used When Installing Roller with Palnuts
  To give you an idea how much length of a shaft the # CE10801 takes up the part # CE10401G is a roller assembly that holds a 5 inch long roller and the shaft length is overall 6-1/4 inches. So that means you pick out the shaft length by adding 1-1/4 inches to the length of the roller you are using. This setup uses the same palnuts.
  view full answer...
• Availability of Flat 5 Inch Boat Trailer Keel Roller
  We don't offer a flat roller assembly, but the 5 inch # CE10401G assembly has a roller that's more flat that might work well for you. The flatter profile would spread more of the boat's weight out over a larger area.
  view full answer...

Do you have a question about this Boat Trailer Part?